Linear Door/Window Battery Powered Stationary Universal External Contact or Glass Break Transmitter DXS-31

Description The Model DXS-31 Supervised Door/Window Transmitter is a battery powered stationary transmitter designed for use with Linear’s DXS and DX format receivers. This transmitter can be used in a variety of wireless remote control applications. Triggering the transmitter with its built-in magnetic switch, an external switch or an external glass break detector sends a digitally coded wireless signal to its companion receiver. The digital DXS code format features over a million possible codes. The DXS transmitters are precoded at the factory to unique codes, so no field coding is required. The DXS-31 can send four different codes: alarm, restore, low battery and status. In a typical installation, the magnet is mounted on a door or window and the transmitter is mounted on the frame. When the magnet moves more than 1/2″ away from the transmitter, an alarm signal is sent. When the magnet returns next to the unit, a restore signal is sent. Alarms and restores can also be sent from external contacts wired to the terminal block. Pressing the case sends a test transmission that updates the receiver to the current state of the contacts and lights the test indicator. General Specifications Dimensions: 1.5 in W x 3.3 in H x 0.88 in D (38 x 84 x 22 mm) Power: Two 3V DL-2032 lithium batteries (supplied); optional – two 3V DL-2450 lithium batteries for extended life Battery Life: Three years (typical) with DL-2032 batteries; five years with DL-2450 batteries Measured Range: 1,500 feet, open air, with DVS-2400 control panel Code Outputs: Alarm, alarm restore, supervisory and low battery External Input Terminals: Terminals 1, 2 accept N/C contact devices Terminals 2, 3 accept N/O glass break sensors JUMPER PIN MODE SELECTION Pins 1, 2 Glass break operation only Pins 2, 3 For external contact and glass break operation Pins 3, 4 For internal reed switch and glass break operation Jumper removed: Internal, external and glass break operation Operating Frequency: 315 MHz Operating Temperature: 32° to 120° F (0° to 49° C) Features Alarm, alarm restore, supervisory and low battery transmissions Includes magnet for internal contact Includes mounting shoe External Contact Terminals DXS format N/O or N/C input loop circuit Powered by 2032 two lithium batteries (included) Optional 2450 lithium batteries can be used for extended life